At the first light turn left on to Highway 235 (Plant Road).
Go 3 miles and the plant is on the right side of the road
(Immediately past the paper mill).
Take Highway 43 North – Continue to follow 43N approximately
120 miles
Turn left at AL-28 W/Cahaba Ave W – Continue to follow AL-28
approximately 8.8 miles
Turn right at Marengo County 21/Marengo County 57 – Continue to
follow County 57 approx. 5.6 miles
GEO plant is on the left
Driving directions to plant in
Cedartown, GA.
If Traveling Hwy 27 South
You must
follow the truck route thru Cedartown. Entering Cedartown,
Wal-Mart will be on your right & Home Depot on your left.
Continue straight on the Hwy-27 by-pass to the 4th traffic
light, turn right onto Martin Luther King Blvd.
Stay straight on MLK thru red light at Main Street
(Business 27) and MLK changes to Canal Street.
Travel about 2 miles to stop sign and turn right onto Hwy 278.
Go past the Industrial Park on left (disregard sign on
right no thru trucks).
Cross over Cedar Creek Bridge and RR tracks then turn left
on Furnace Street.
Proceed 2 blocks to Wissahickon Ave and turn left.
GEO is the second industry on left. Go inside the gatehouse
and follow instructions on the board.
If
Traveling Hwy 27 North
From 75 take I-20 West
for about 33 miles.
Then take exit #11 onto Hwy 27 in Bremen Georgia traveling
North about 20 miles.
Go straight thru 1st red light as you come into Cedartown
turning left at the next traffic light onto Martin Luther King
Blvd.
Stay straight on MLK thru red light at Main Street
(Business 27) and MLK changes to Canal Street.
Travel about 2
miles to stop sign and turn right onto Hwy 278.
Go past the Industrial Park on left (disregard sign on
right no thru trucks).
Cross over Cedar Creek Bridge and RR tracks then turn left
on Furnace Street.
Proceed 2 blocks to Wissahickon Ave and turn left.
GEO is the second industry on left.
Go inside the gatehouse and follow instructions on the board.
If Traveling 278 West
From I-20, get off on the
Thornton Road exit #44.
Turn right on the exit ramp.
Take this route about 40 miles straight west to Cedartown.
(After about 5 miles this route combines with Hwy 278)
As you come into Cedartown, go under the overpass and turn
left onto ramp to 278 West.
At the stop sign turn right. This is the Cedartown Bypass.
Turn right onto Martin Luther King Blvd (100 North).
Stay straight on MLK thru red light at Main Street
(Business 27) and MLK changes to Canal Street.
Travel about 2 miles to stop sign and turn right onto Hwy 278.
Go past the Industrial Park on left (disregard sign on
right no thru trucks).
Cross over Cedar Creek Bridge and RR tracks then turn left
on Furnace Street. Proceed 2 blocks to Wissahickon Ave and turn
left.
GEO is the second industry on the left.
Go inside the gatehouse and follow instructions are on the
board.
If Traveling 278 East
Go past the Industrial Park on left
(disregard sign on right no thru trucks).
Cross over Cedar Creek Bridge and RR tracks then turn
left on Furnace Street.
Proceed 2 blocks to Wissahickon Ave and turn left. GEO is the
second industry on the left.
Go inside the gatehouse and follow instructions are on the
board.
The Plymouth facility is
located inside Domtar Paper Mill in Plymouth, NC.
From the West:
US-64 East to Plymouth, NC
Turn Left onto NC HWY 149 North
Stop at Guard Gate for instructions
From the North:
US-17 South to Merry Hill, NC
Turn Left onto NC-45 South
Turn Right onto US-64 (approx. 5 miles)
Turn Right onto NC HWY 149 North
Stop at Guard Gate for instructions
From the South:
US-17 North to Washington, NC
Turn Right onto NC-171 to Jamesville, NC
Turn Right onto US-64 East (approx. 8 miles)
Turn Left onto NC HWY 149 North
Stop at Guard Gate for instructions
Driving directions to Harrison,
NJ
FROM NJ TURNPIKE or 280W:
Take exit 15W
Take 280W to exit 16 (Harrison)
First light at the end of ramp make a right turn onto 5th Street
At the light and make a left onto Bergen
At the light make a left onto Frank E. Rodgers Blvd…
Go under the 280 overpass and make a sharp right turn onto Essex
Street…
Continue on to the end of Essex Street to the Plant at First
Street intersection
FROM 280 Headed EAST:
Take exit 16
Stay in right lane
At the second light make a right and get into the left lane…
The first light is First Street…make a left onto First Street…
Continue for 3 and ½ blocks and we are on the right at the Essex
Street intersection
Use the gatehouse phone to announce arrival and further
directions.
Driving directions to the
Allentown, PA.
Westbound on I-78
When westbound (from New Jersey) on I-78, use Exit 53 (Route 309
North). Continue on Route 309 North for 1.5 miles to Route 22 East (Bethlehem).
Go East on Route 22 for 1.5 miles to Cedar Crest Blvd. Exit. Bear right on to
Cedar Crest Blvd. (North).
Continue North on Cedar Crest Blvd. for 1.7 miles to the plant
entrance. You will ascend a hill and then descent and cross small concrete
bridge. Turn right immediately after the bridge at the GEO /TRIMET PRODUCTS
sign.
Eastbound on I-78
When eastbound (from Central Pennsylvania) on I-78, use Exit 51
(Route 22 East - Whitehall). Continue East on Route 22 for 4.1 miles to Cedar
Crest Blvd. Exit. Bear right on Cedar Crest Blvd. (North).
Continue North on Cedar Crest Blvd. for 1.7 miles to the plant
entrance. You will ascend a hill and then descent and cross small concrete
bridge. Turn right immediately after the bridge at the GEO /TRIMET PRODUCTS
sign.
WHEN EXITING THE NORTHEAST EXTENSION OF THE PA TURNPIKE (Rt.
476)
When exiting the Northeast Extension of the PA Turnpike (Rt.
476), bear right on to Route 22 East. Continue East on Route 22 for 2.4 miles to
the Cedar Crest Blvd. Exit. Bear right on to Cedar Crest Blvd. (North).
Continue North on Cedar Crest Blvd. for 1.7 miles to the plant
entrance. You will ascend a hill and then descent and cross small concrete
bridge. Turn right immediately after the bridge at the GEO /TRIMET PRODUCTS
sign.
WESTBOUND ON ROUTE 22
When westbound on Route 22, pass the Allentown Exits, which you
come to and continue to the Cedar Crest Blvd. Exit. Bear right on to Cedar Crest
Blvd. (North).
Continue North on Cedar Crest Blvd. for 1.7 miles to the plant
entrance. You will ascend a hill and then descent and cross small concrete
bridge.
Turn right immediately after the bridge at the GEO /TRIMET
PRODUCTS sign.
Driving directions to the
Georgetown Plant.
Via 17 South
Merge to the right at the State Pier 1 sign going towards
International Paper.
Turn left at the stop sign.
Turn left at the 4-way intersection.
Make a right at the GEO Specialty Chemical Georgetown Plant
sign.
Via 17 North
Merge to the right before the Georgetown Steel Mill.
Turn left at the GEO Specialty Chemical Georgetown Plant sign.
From the East (Selma, AL/Montgomery,AL area)
Take US 80 East approximately 55 miles
Turn left at Marengo County 57 – travel 407 feet
GEO plant is on the right
From the North (Birmingham, AL area)
Take I/20W/I-59S approximately 84 miles
Take exit 45 toward Union approximately 0.2 miles
Turn left at County Road 208 approximately 1.3 miles
Slight right at AL-13 S/AL-7/US-11 S/US-43 S/County Road 231 –
4.7 miles
Turn left at Livingston Avenue – 279 feet
Turn left at US-43 S/Greensboro Street – 25.5 miles
Turn right at US 80W – 6.2 miles
Turn left at Marengo County 57 – 407 feet
GEO plant will be on your right
From the West (Meridian, MS area)
Merge onto 1-20 E/1-59 N via the ramp to US-45/Tuscaloosa/Macon
– 15.5 miles
Take exit 169 for US-80/US-11 toward Kewanee – 0.2 miles
Turn right at AL-7/US-11 N/US-80 E (Entering Alabama) – 5.5
miles
Turn right at AL-8 E/US-80 E – 26.3 miles
Turn right at Marengo County 57 -325 feet
GEO plant will be on the right.